HOME | Chinese | ENGLISH | Contact Us
 
Chitosan Series
  GS – Chitosanase
  D-Glucosamine Series
  DC Series
  Healthy Food Series
  Water-Soluble Chitosan Series
  Specialized Chitosan Series
  Chitin Auxiliary Series
  Chitin Series
  Chitosan soap
  Fish Collagen Powder
 
Contact: Lin Rongquan
Add: No.89 Zhongxing Road. Li'ao, Yuhuan, Zhejiang, China
P.C.: 317602
Tel:+86-576-7259169
Fax: +86-576-7259179
E-mail:
yhhy@jinke-chitin.com
 
 
 
 
 
Product Catalog > Specialized Chitosan Series
Biological Chromatography Gel

Biological Chromatography Gel is white grain, with 40, 60, 80, 100, 120 and 200 mesh, ect, and kept in the 20% ethanol, which is very steady in the organic solvent such as ethanol, glycerol, acetone, tetrahydrofuran, benzene, dichloromethe, chloroform: The gel won't be dissolved in 1.5 PH acid mediums with good stability. It also can be used for separating albumens, enzyme and other biological products. The experiment has shown that the rate of recovery of enzyme to the neutral protease is more than 90%. Choosing different mesh-chromatography gel is according to different demands; thick separation in biological products can choose lower mesh-gel, as high can choose higher ones. Regenerated conditions of chromatography gel refer to methods of common gel.

Application process is as follow:

Put Biological Chromatography Gel on the columniation, loading certain concentration of enzyme sample solution, using water to elute buffer, measuring the course of eluting by Ribose albumen detector 280nm, then subsection collects eluates.


Steps are as follows:

1. Loading: Generally put about 1/2 high of water or buffer into the columniation, then mixing the melted gel into sparse slurry, pouring it into columniation, making it subside naturally. Operate so in succession, can get a better columniation bed.

After installing columniation, using eluting buffer to be balance, generally flow through the columniation bed under constant voltage with buffer of rolume 3-5.

2. Adding: Remove the insoluble matter before loading. Assimilating the liquid around the surface of columniation to prepare adding sample after balancing columniation bed. Consumption 1-2ml pure samples for 100ml bed volume generally. After the sample flow into the gel naturally in the post, and then add some eluates on the gel surface.

3. Eluting: Collect eluates step by step, adopting various kinds of analytical method to observe component separated situation according to sample nature, getting eluting picture.

4. Growing and Maintaining: With the general ion exchanger.

 
 
 
Add: No.89 Zhongxing Road. Li'ao, Yuhuan, Zhejiang 317602, China
Tel: +86-576-87256169 /87259273/ 87501888         Fax: +86-576-87259179
E-mail: yhhy@jinke-chitin.com       
Copyright(C)2006,Golden-Shell Biochemical Co.,Ltd.
All Rights Reserved. Supported by NetSun ChemNet ChinaChemNet